NEWS

Fine atomizing spray, chemical fiber spinneret, spinneret

The manufacturer of stainless steel ferrule connector will tell you about the maintenance of ferrule connector and the preparation before installation

Time:

2022-11-23 14:23

The manufacturer of stainless steel ferrule connector will tell you about the maintenance of ferrule connector and the preparation before installation

Manufacturer of stainless steel ferrule connector: how to maintain the ferrule connector?

The ferrule connector is composed of three parts: connector body, ferrule and nut. All of our ferrule connectors need maintenance, so how do we properly maintain them?

The maintenance method of ferrule connector is as follows:

1. Regularly check the tightness of the ferrule joint, and check it through the drain nozzle. If there is internal leakage, handle it according to the internal leakage treatment procedure.

2. Inject a certain amount of fresh grease into the sleeve of the socket joint at an appropriate time. The amount and frequency of the injection depend on the frequency of the socket movement. Generally, after the socket joint moves once, it is necessary to inject an appropriate amount of grease. The amount of grease injected each time is about 1/8 of the volume of the sealing system.

3. Before winter, carry out comprehensive maintenance for the core connector, focusing on draining the water in the core connector cavity and the actuator, which will affect the normal function.

4. For the ferrule joint that rarely moves, move it less once a year, and inject proper amount of lubricating grease at the same time to prevent the ball from sticking to the ferrule joint seat and protect the ferrule joint seat and ball.

8c020134-0738-4fb8-bec5-49a10c17b92b.jpg

Manufacturer of stainless steel ferrule connector: What should be done for ferrule connector before installation?

The ferrule connector is composed of three parts: the connector body, ferrule and nut. The invention is convenient for disassembly and assembly, without welding and pipe expansion, with good performance, light weight, advanced structure, small volume, and convenient use. The core connector also needs to be installed. What processing work do we generally need to do before the core connector is installed?

During installation, the socket connector at the outlet of the water pump or oil pump shall be opened and closed first. The purpose of this is to effectively reduce the impact of the extension or compression of the socket connector. Therefore, we add corresponding limit devices at the flange and its two ends.

In the early stage of installation, we should pay attention to the above installation and handling work. All of us should do this before installing the plug-in connector.

Manufacturer of stainless steel ferrule connector: how to ensure the sealing and installation of ferrule connector?

During the use of ferrule connector, its sealing is a very important performance. During installation, we need to do sealing installation, so how to conduct the sealing installation of ferrule connector? Let's take a look at the relevant instructions.

In order to ensure the installation and sealing of ferrule joints, first cut the seamless steel pipe of appropriate length with a saw blade, remove the burrs at the ends, and insert nuts and fasteners on the seamless steel pipe.

Pay attention to the nut and the bite direction. Do not install the nut reversely. Apply lubricating oil to the screw and ferrule of the pre assembled connector body, insert the steel pipe into the connector body, and tighten the nut by hand.

Tighten the nut until the ferrule blocks the steel pipe of the fermentation tank. This turning point can be felt by increasing the tightening torque.

When the pressure point is reached, tighten the nut for 1/2 turn, remove the preassembled connector body, and check the insertion of the cutting edge of the ferrule. The visible protruding belt must fill the space at the front end of the ferrule. It can rotate slightly, but cannot move axially. During the next installation, the threads of the connector body should be coated with lubricating oil, and the compression nuts should be screwed together until the tightening force increases. Then tighten the ferrule connector for 1/2 turn to complete the installation.

OK, that's all for the editor. Thank you for watching. See you next time.