Number of views:
We could not find any corresponding parameters, please add them to the properties table
Low pressure slip-lock connector
Low pressure sliding lock straight fitting for atomization humidification system Size: 6mm, 8mm Description: slide lock connector is used for high-pressure mist cooling system. It is easy to connect PE pipe and nylon pipe. Its main advantages are fast connection and easy maintenance. The nozzle with threaded 10 / 24 UNC and Φ6mm, Φ8mm can be installed on it.
Brass High-pressure humidification system misting nozzle Nozzle model: HH-HN-BN-11 Subject: 10/24 UNC, 12/24 UNC, M5. Working pressure: 20-100 bar Orifice size: 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm,0.7mm,0.8mm Description: HH-HN-BN-11 is a high-quality brass material, which is widely used in high-pressure mist cooling and humidification systems and courtyard spray systems. It has a cleanable anti-drip system, stainless steel holes and the most popular atomizing nozzle.
High-pressure cold misting system nozzle Nozzle model: HH-HN-ESST-55 Subject: 1/8 NPT Working pressure: 20-100 bar Orifice size: 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm，0.7mm，0.8mm Description: HH-HN-ESST-55 is a complete stainless steel head, the body adopts anti-drip system and pp filter for high-pressure water mist cooling system. FAQ: Is there an anti-drip system? Answer: Generally speaking, all our high pressure nozzles come with anti-drip springs and balls, but there are different pins between 10/24" and 1/8" NPT thread types.
High pressure cold misting system nozzle Nozzle model: hh-hn-sns-55 Subject: 10 / 24 UNC, 12 / 24 UNC, M5. Working pressure: 20-100 bar Orifice size: 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm，0.7mm，0.8mm Description: HH-HN-SNS-55 is a complete stainless steel atomizing sprinkler, widely used in high pressure fog cooling humidification system, courtyard spray system, dust removal system, etc. It has a built-in washable drip proof system and a stainless steel needle. According to different orifice sizes, the injection angle ranges from 45 to 90 degrees.